Call us: 985-898-0025 Only $9.00 Shipping no matter how much you buy!
Menu
Mississippi GPS Map of Okhissa Lake

Mississippi GPS Map of Okhissa Lake

In Stock
Your Price:$199.00
Select GPS Type
Lowrance/Simrad
Raymarine
Raymarine Dragonfly
Description


 

 

 

Compatibility:

LOWRANCE       SIMRAD     RAYMARINE       GARMIN    HUMMINBIRD

 

LOWRANCE – We are compatible with most Lowrance GPS Units:

List of compatible Lowrance GPS Models:

HDS Gen1 Button (Non Touch), HDS Gen 2 Button (Non Touch)

HDS Gen2 TOUCH, Elite TI

HDS Gen3, HDS Carbon

HOOK 2 GPS Units are not compatible with this mapping software.

Elite HDI, Elite Chirp, HOOK

** Attention Elite HDI, Elite Chirp, and HOOK users, due to the processor built into your GPS and the size of our mapping software will have a delay in zooming and scrolling around the map

TOUCH Screen GPS Users do not need to worry about this! **

Elite DSI is not compatible, if you are not sure what Elite GPS Model you have look at the power cable.

Elite DSI will have a BLACK connector on the power cable.

Elite HDI will have a BLUE connector on the power cable.

If your GPS was not listed above in black then your GPS is not compatible with this mapping software.


 

SIMRAD – We are compatible with all Simrad GPS Units:

 

  

RAYMARINE – We are compatible with most Raymarine GPS Units:

List of compatible Raymarine GPS Models and Software:

a Series, c Series, e Series, eS Series, gS Series (LightHouse II Software version 17 or newer)

Axiom, Axiom Pro (LightHouse 3 Software version)

DragonFly, DragonFly Pro (LightHouse II Software version 12 or newer)

A Series, C Series, E Series, G Series (LightHouse II Software version 17 or newer)

To determine software version, on start up of the GPS look in the right corner for a V##

 


GARMIN – We are currently not compatible with Garmin GPS Units:

Please stay connected to our social media and website for updates on Garmin products.

 


HUMMINBIRD – We are currently not compatible with Humminbird GPS Units:

Your support helps! Let Humminbird know you would like to see our maps on their GPS!

 

 


 



INSTRUCTIONS:

This is a plug and play chip, meaning if the chip is not in the unit the mapping software will not work.

Since the software on the GPS platform is continuously updated, here are a few how to on the E-Card:


How do I load the Classic E-Card into my GPS?

 

                                         FOR LOWRANCE TOUCHSCREEN GPS USERS:

1.    Insert the Micro SD or Micro SD inserted in full size SD adapter into GPS card reader, you do not want to force the card into the GPS, flip the card around till the card easily makes contact with the reader.

2.    Once inserted, wait 5-10 seconds for GPS to read E-Card, you will see loading charts at the bottom. If it does not say loading charts at the bottom, the GPS is not reading your SD card, where you will want to check the connection of the SD card and the GPS.

3.    First, zoom all the way out on your GPS to about 500 – 300 miles, where we created a welcome screen to make sure our customers know they are looking at our mapping system on the GPS.

4.    Normally on a brand new GPS you will have to set up a few settings in load the mapping software, once these settings are turned on you will not have to set them again. On the right side of the touch screen you will see a MENU tab with settings. 
You want to first go into the CHART OPTIONS tab, which if you do not see press the BACK button at the top of the MENU till you get where the top tab say Return to Cursor or Clear Cursor.

5.    Once in CHART OPTIONS, you will see a CHART SOURCE tab, make sure you are set to Lowrance.

6.    Back in our CHART OPTIONS tab, you will also see a PRESENTATION tab, where you are going to go in and turn the SHADED RELIEF setting on (the colored triangle to the right indicates on).

7.    Once you turn your SHADED RELIEF setting on, you should see our mapping software replace the GPS screen.



FOR LOWRANCE NON TOUCH BUTTON HDS GPS USERS:

1.    Insert the Micro SD inserted in full size SD adapter into GPS card reader, you do not want to force the card into the GPS, flip the card around till the card easily makes contact with the reader.

2.    Once inserted, wait 10-15 seconds for GPS to read E-Card, you will see loading charts at the bottom. If is does not say loading charts at the bottom, the GPS is not reading your SD card, where you will want to check the connection of the SD card and the GPS. Pop the chip out of the GPS and replace the E-Card.

3.    First, zoom all the way out on your GPS to about 500 – 300 miles, where we created a welcome screen to make sure our customers know they are looking at our mapping system on the GPS.

4.    Normally on a brand new GPS you will have to set up a few settings in load the mapping software, once these settings are turned on you will not have to set them again. On the GPS keypad you will want to press the MENU button, depending on the software version of the GPS you will need to press this once or twice. Words here on in (parenthesis) are other terms different software versions use.

5.    First, you are looking for the CHART SOURCE (CHART DATA) and making sure it is set to Lowrance. Normally, you will see this setting after the first time pressing the MENU button, however, you may have to press the MENU button an additional time. Press ENTER on the CHART tab, you should see the setting for CHART SOURCE (CHART DATA), if not sometimes there is an additional tab labeled CHART OPTIONS under the same CHART tab.

6.    Now that you are in the CHART OPTIONS tab changing the CHART SOURCE, you are going to look for another setting labeled IMAGERY, and set to SHADED RELIEF. Some software versions also have this setting on the first time pressing the MENU button.

7.    Once you turn your SHADED RELIEF setting on, you should see our mapping software replace the GPS screen.



FOR LOWRANCE HOOK, ELITE HDI / CHIRP GPS USERS:

1.    Insert the Micro SD into GPS card reader, you do not want to force the card into the GPS, flip the card around till the card easily makes contact with the reader.

2.    Once inserted, wait 10-20 seconds for GPS to read E-Card, you will see loading charts at the bottom. If is does not say loading charts at the bottom, the GPS is not reading your SD card, where you will want to check the connection of the SD card and the GPS. Pop the chip out of the GPS and replace the E-Card.

3.    First, zoom all the way out on your GPS to about 500 – 300 miles, where we created a welcome screen to make sure our customers know they are looking at our mapping system on the GPS.

4.    Normally on a brand new GPS you will have to set up a few settings in load the mapping software, once these settings are turned on you will not have to set them again. On the GPS keypad you will want to press the MENU button, depending on the software version of the GPS you will need to press this once or twice.

5.    First, you are looking for the CHART SOURCE (CHART DATA) and making sure it is set to Lowrance. Normally, you will see this setting after the first time pressing the MENU button, however, you may have to press the MENU button an additional time. Press ENTER on the CHART tab, you should see the setting for CHART SOURCE (CHART DATA), if not sometimes there is an additional tab labeled CHART OPTIONS under the same CHART tab.

6.    Now that you changed the CHART SOURCE to Lowrance, you are going to look for another setting labeled IMAGERY, and set to SHADED RELIEF. Some software versions also have this setting on the first time pressing the MENU button.
*HOOK Unit Users – HOOK Units software will default the IMAGERY setting to 2D, which forces the user to change the setting every time the E-Card is removed or the unit is restarted.

7.    Once you turn your SHADED RELIEF setting on, you should see our mapping software replace the GPS screen.

                                       


FOR SIMRAD TOUCHSCREEN GPS USERS:

1.    Insert the Micro SD into the GPS card reader, you do not want to force the card into the GPS, flip the card around till the card easily makes contact with the reader.

2.    Once inserted, wait 5-10 seconds for GPS to read E-Card, you will see a loading spinning wheel at the top left corner of the screen. If it does not have a loading wheel, the GPS is not reading your SD card, where you will want to check the connection of the SD card and the GPS.

3.    First, zoom all the way out on your GPS to about 500 – 300 miles, where we created a welcome screen to make sure our customers know they are looking at our mapping system on the GPS.

4.    Normally on a brand new GPS you will have to set up a few settings in load the mapping software, once these settings are turned on you will not have to set them again. On the right side of the touch screen you will see a MENU tab with settings. 
You want to first go into the CHART OPTIONS tab, which if you do not see press the BACK button at the top of the MENU till you get where the top tab will no longer say BACK.

5.    Once in CHART OPTIONS, you will see a CHART SOURCE (CHART DATA) tab, make sure you are set to Insight.

6.    Back in our CHART OPTIONS tab, depending on the software version your GPS is running you, will also see a PRESENTATION tab. Some software versions have a tab under CHART OPTIONS labeled IMAGERY, here you are going to go in and turn the SHADED RELIEF setting on (some software have a colored triangle to the right which indicates on).

7.    Once you turn your SHADED RELIEF setting on, you should see our mapping software replace the GPS screen.

 

 


                                        FOR RAYMARINE TOUCHSCREEN MFD GPS USERS:

1.    Insert the Micro SD into the GPS card reader, you do not want to force the card into the GPS, flip the card around till the card easily makes contact with the reader.

2.    Once inserted, you will see the screen flash white indicating that the GPS has recognized the SD card.

3.    First, zoom all the way out on your GPS to about 500 – 300 miles, where we created a welcome screen to make sure our customers know they are looking at our mapping system on the GPS, after you select the chart you will return back to the chart screen.

4.    Normally on a brand new GPS you will have to set up a few settings in load the mapping software, once these settings are turned on you will not have to set them again. On the right side of the touch screen you will see a MENU tab with a drop down menu. 
You want to first go into the PRESENTATION tab.

5.    Once in PRESENTATION, you will see a CHART SELECTION tab.

6.    The CHART SELECTION tab will open a new window, showing the different mapping software on the GPS. We normally popup in the very last tab replacing the LightHouse Charts tab. Sometimes you will have to select the LightHouse Charts and repeat this step and will see the STANDARD MAPPING logo and E-Card Description.

7.    If map still does not want to load, make sure the connection is good between the SD card and the card reader. Remove the chip and reinsert the E-Card into the GPS. You should see the E-Card in your CHART SELECTION now.

 

 

FOR RAYMARINE BUTTON MFD, DRAGON FLY & PRO GPS USERS:

1.    Insert the Micro SD into the GPS card reader, you do not want to force the card into the GPS, flip the card around till the card easily makes contact with the reader.

2.    Once inserted, you will see the screen flash white indicating that the GPS has recognized the SD card.

3.    First, zoom all the way out on your GPS to about 500 – 300 miles, where we created a welcome screen to make sure our customers know they are looking at our mapping system on the GPS, after you select the chart you will return back to the chart screen.

4.    Normally on a brand new GPS you will have to set up a few settings in load the mapping software, once these settings are turned on you will not have to set them again. First, make sure the cursor is not on the screen by pressing the back arrow. Press the center toggle button in or press the OK button. The button MFD should have a MENU button on the key pad (looks like three lines).
You want to first go into the PRESENTATION tab.

5.    Once in PRESENTATION, you will see a CHART SELECTION tab.

6.    The CHART SELECTION tab will open a new window, showing the different mapping software on the GPS. We normally popup in the very last tab replacing the LightHouse Charts tab. Sometimes you will have to select the LightHouse Charts and repeat this step and will see the STANDARD MAPPING logo and E-Card Description.

7.    If map still does not want to load, make sure the connection is good between the SD card and the card reader. Remove the chip and reinsert the E-Card into the GPS. You should see the E-Card in your CHART SELECTION now.

Related Items

Mississippi GPS Map of Ross Barnett Reservoir
Average Rating 0 Review(s)
Your Price: $199.00
In Stock